Fence Installation & Repair across Thurrock, London, Kent and surrounding areas

Replacing panels and posts, installing complete new runs of fencing, repairing storm damage, and hanging gates — for homes and commercial sites.

New timber fence panels and posts installed along a garden boundary across Thurrock, London, Kent and surrounding areas
  • Fully insured
  • Family-run business
  • Transparent pricing
  • Before & after photos
  • Digital job records
  • Cleaning & maintenance under one roof

Fencing Prices

New installations and larger repairs are quoted by project — we assess the run length, ground conditions, fence style, and materials needed and give you a clear total price. Single-panel replacements and small storm repairs are charged at our hourly rate.

Most Popular

Project Quote

Free site assessment

Fixed price for your specific job

  • New close-board fence from £80–£100/m (labour + materials)
  • New lap-panel fence from £55–£75/m (labour + materials)
  • Post replacement included where needed
  • Gate hanging quoted as part of the project
  • Gravel boards fitted as standard

Hourly Rate

from £30/hr

minimum of two hours · for repairs & small jobs

  • Single panel replacement
  • Storm damage — 1 to 3 panels
  • Concrete spur fitting to leaning post
  • Arris rail & gravel board swaps
  • Materials quoted separately

What's Included

  • Assessment of existing post condition before recommending repair or replacement
  • Removal and disposal of old damaged panels and posts
  • Post setting in postcrete or concrete — correct mix and cure time
  • Gravel boards fitted along the base to keep panels clear of soil
  • Panels hung level with correct fixing to posts
  • Arris rails and featherboards where close-board fencing is specified
  • Style matched to existing fence where possible for repairs
  • Old post excavation and clean backfill for failed post replacement
  • Clear-away of all offcuts, old timber, and waste before leaving

What's Not Included

  • Planning or legal advice on boundary ownership — check with a solicitor or the Land Registry
  • Timber treatment or fence painting — quoted separately on request (recommended after installation)
  • Breaking up or removing existing concrete footings where posts have been set in concrete slabs
  • Listed building or conservation area consent — always check with your local authority
  • Soil disposal where ground conditions produce surplus spoil from digging
  • Security or acoustic fencing to specialist specifications — quoted separately

Fence Installation & Repair

A sound fence keeps your garden private, secure and tidy — but panels and posts don't last forever. We replace individual panels, repair or renew rotten and leaning posts, and install complete new runs of fencing across Thurrock, Havering, Essex, East London and Kent. Whether it's one broken panel spoiling the look of the garden or a full boundary that's reached the end of its life, we'll get it straight and solid again.

We're also on hand after bad weather. Storm damage is one of the most common reasons we're called out — blown panels, broken arris rails and snapped posts can all undermine a fence overnight, leaving gardens open and security compromised. We respond promptly to storm repair enquiries and can often fit repairs into the schedule within a few days of the damage occurring.

Serving from our Tilbury base, we are well placed to cover the wider region and work for homeowners, landlords, letting agents and commercial clients on everything from a single panel to a full site perimeter.

Types of Fencing We Install and Repair

Panel Fencing

Lap panel and featherboard panel fencing is by far the most common type in residential gardens across Essex, London and Kent. Panels typically come in 1.8m or 1.5m heights and are slotted between posts at 1.83m centres. They're affordable, widely available and quick to install. The downside is that lap panels are relatively lightweight — in exposed gardens or those prone to catching wind, they can fail in strong gusts. We fit them securely to either timber or concrete posts depending on the customer's preference and the site conditions.

Close-Board Fencing

Close-board fencing (also called featherboard or palisade fencing) is built on-site using arris rails fixed between posts, with vertical featherboard planks overlapped and nailed along them. It is significantly stronger and longer-lasting than panel fencing, handles exposed sites better, and can follow sloping ground by raking the boards to match the gradient. Close-board is the preferred choice for boundaries that need to last, and is common around commercial and industrial sites. Repairs often involve replacing individual arris rails or boards without disturbing the posts.

Picket Fencing

Picket fencing provides a front-garden boundary that gives a property charm while keeping it open and welcoming. We install picket fencing using either timber or composite materials, with pointed or flat-topped pales fixed to horizontal rails between posts. It's a lower fence (typically 900mm to 1.2m) not intended for privacy, and suits period and cottage-style properties well.

Trellis

Trellis panels fitted above a fence line add height for privacy without the visual weight of a solid panel extension. We fix trellis to the tops of existing posts where they have enough height in hand, or add a trellis topper using appropriate fixings. Trellis is also used as a standalone feature to divide garden areas or provide a structure for climbing plants.

Gravel Boards

A gravel board fitted along the base of a fence keeps the panels lifted clear of soil and standing water — the most common cause of rot in timber fencing. We fit concrete or timber gravel boards as part of new fence installations and as retrofits to existing fences. This simple addition can significantly extend the life of the panels above.

Gate Hanging

We hang timber and metal gates as part of fencing work or as standalone jobs. This includes fitting gate posts correctly — slightly closer than the gate width to allow for hinges and a closing gap — digging and concreting posts in, and hanging and adjusting the gate so it swings freely and closes squarely. A well-hung gate should operate with one finger and latch cleanly; a poor installation rattles, drops and is a constant nuisance.

Repair vs Replacement — Honest Assessment

When a fence is damaged or deteriorating, the practical question is whether repair or replacement gives better value. We always assess honestly rather than defaulting to the larger job. A single storm-blown panel can be replaced while leaving the rest of the fence and posts untouched, providing the posts are sound. A fence that is repeatedly losing panels, has multiple posts leaning or rocking, or has widespread rot throughout the timber is usually more economical to replace in full than to keep patching.

Post condition is the critical factor. Timber posts rot at ground level, often appearing sound above the surface while soft and failing below it. A post that can be rocked at the base — even slightly — will not hold a fence securely in wind. Where posts are failing but still standing, we can often fit concrete spurs (a repair spur concreted in alongside the existing post and bolted to it) to restore rigidity without digging out and resetting. Where posts have failed completely, we dig them out and set new ones in postcrete or concrete.

For party fence situations between neighbouring properties, we note that questions of ownership, cost-sharing and responsibility are legal matters. We are happy to carry out whichever works are agreed between neighbours, but we cannot advise on the legal position. If there is any dispute, it is worth checking with a solicitor or the Land Registry before commissioning work.

Timber Treatment, Painting & Commercial Fencing

New timber fencing is often supplied pressure-treated, which provides baseline protection against rot. Applying a timber preservative or fence paint after installation — and repeating it every year or two — extends the life of the fence considerably and helps it stay looking smart. We can apply timber treatment or fence paint as part of a new installation or as a standalone job on existing fencing. Dark shades like charcoal and slate grey are currently popular and can transform the look of a garden at relatively low cost.

For commercial and industrial clients, we install close-board fencing, palisade fencing and site hoarding for construction projects, letting sites and commercial boundaries. We work with facilities managers and site managers across the region, and are experienced in working to site safety requirements and access arrangements. For ongoing facilities maintenance arrangements, see our facilities maintenance service.

Landlords with garden boundaries to maintain between tenancies will find our fencing repairs straightforward to arrange alongside other void property works. A secure, tidy boundary fence is one of the details that makes a property present well for viewings and new tenants.

You Might Also Need

Fencing work often forms part of a broader exterior tidy-up. These services are regularly booked alongside fencing — combining them makes better use of the visit and leaves the whole boundary looking well maintained.

Garden Clearance

Overgrown vegetation along a fence line makes installation and repair harder and often contributes to rot. Clearing the boundary before fencing work begins gives the team clean access and reveals the true condition of the posts.

Fence Painting & Treatment

New timber fencing should be treated within a season of installation — either with a preservative or a fence paint. We can apply treatment as part of the same visit. Dark charcoals and slate greys are currently popular and transform the look of a garden at relatively low cost.

Grounds Maintenance

A repaired or newly installed fence is most effective when the garden it encloses is well maintained. For commercial clients and landlords, ongoing grounds maintenance — cutting grass, clearing paths, keeping boundaries tidy — can be arranged on a regular schedule.

Gate Hanging & Carpentry

New fence posts provide the ideal opportunity to hang a new or replacement gate correctly from fresh concrete-set posts. A gate hung as part of a fencing job is always better set than one retrofitted to old posts that have already moved.

Driveway & Patio Pressure Washing

Replacing a fence line and pressure washing the adjacent driveway or patio at the same time gives the whole front or rear of the property a freshly maintained look. Both services can be scheduled on the same day.

Void Property Services

For landlords, a secure and tidy boundary fence is one of the details that makes a property present well for new tenant viewings. We can arrange fencing repairs alongside cleaning, decorating, and carpentry as part of a co-ordinated void property programme.

Our Process

What You Can Expect

From your first call to the finished job, here is how our fence installation & repair service works.

1

Tell us how much fencing is involved — a single panel, a run of several, or a whole boundary — and whether it's a repair or a fresh install.

2

Send photos and the approximate length, plus a note on the ground type (soil, concrete or paving) so we can plan posts and fixings.

3

We confirm a price and book a slot, then source panels, posts and postcrete to match the existing style where possible.

4

We remove damaged sections, set or repair posts firmly, and fit the panels level and square along the line.

5

We check the fence is stable and upright, and clear away old panels, posts and offcuts.

Insider Advice

Helpful Hints & Tips

Posts fail before panels

Most fences come down because the post has rotted at ground level, not because the panel is worn. Concrete posts or repair spurs give a much longer-lasting boundary than timber posts alone.

Check your fence before winter storms

A wobbly panel or a post you can rock by hand will be the first to go in high winds. Fixing it in calm weather is far easier than a scramble after a storm.

Keep panels clear of the ground

Panels sitting directly on soil soak up moisture and rot from the bottom. A gravel board along the base lifts the timber clear and greatly extends its life.

Our Commitment to You

Our Workmanship Guarantee

Repair and maintenance work carried out by Multrex Maintenance Ltd is guaranteed against defects in workmanship for 12 months from the completion date. If the same fault recurs due to our workmanship within this period, we will return to investigate and rectify it at no charge. This guarantee covers Multrex labour — it does not cover faults arising from pre-existing conditions, customer-supplied materials, normal wear and tear, or damage caused after completion.

  • 12 months workmanship guarantee from completion date
  • Same fault recurring from our work? We return at no charge
  • Does not cover pre-existing conditions or customer-supplied parts
  • Unrelated new faults are a separate job

Common Questions

Fence Installation & Repair — FAQs

Book a Service or Request a Quote

Fill out the form below and our team will get back to you promptly.

By submitting this form, you agree for Multrex Maintenance Ltd to contact you about your enquiry. Your details will only be used to respond to your request.
Chat with us