- Agreed scope and records
- Family-run business
- Transparent pricing
- Before & after photos
- Digital job records
- Cleaning & maintenance under one roof
Transparent Pricing
Radiator Service Pricing
Labour from £50/hr. Minimum attendance £90. Replacement valves, brackets and parts quoted separately in advance. Gas and boiler work is outside our scope.
Radiator Maintenance
£90 minimum attendance
- Bleeding & balancing radiators
- Valve repair or replacement
- Re-securing loose brackets
- Even heat across all rooms
- No gas or boiler work involved
Electric Wall Heater Swap
like-for-like replacement
- Failed unit swapped like for like
- All major brands fitted
- Safe disconnect & reconnect
- Tested before we leave
- New wiring quoted separately if needed
Radiator & Wall-Heater Maintenance
Even Heat — Without Calling a Gas Engineer
When a radiator stays cold at the top or one room never quite warms up, it's usually down to trapped air or an unbalanced system. We bleed and balance radiators, replace worn or leaking valves, and re-secure loose radiator brackets across Thurrock, London, Kent, Essex and surrounding areas, so your heating works evenly and quietly. We also swap like-for-like electric wall heaters where an existing unit has failed.
Gas work and boiler repairs are outside our scope — we don't carry out any work on gas appliances or boilers, and we'll always point you to a suitably qualified engineer where that's what's needed. Pricing for radiator and wall-heater tasks depends on the parts required and the number of units involved, so get in touch and we'll provide a quote.
What's Included
- ✓Bleeding and balancing individual radiators
- ✓Thermostatic radiator valve (TRV) repair or replacement
- ✓Manual valve repair or replacement
- ✓Re-securing loose wall brackets
- ✓Like-for-like electric panel heater swap
- ✓Bleed keys, valves, and standard fittings carried on the visit
What's Not Included
- ✕Gas appliances, boilers, or any gas pipework — Gas Safe engineer required
- ✕Full central heating system installation or alteration
- ✕Power flushing the central heating circuit
- ✕Supply of electric heaters beyond standard panel replacements (quoted separately)
You Might Also Need
Services often booked alongside radiator maintenance.
Plumbing
For radiator removal, leak investigation, and anything involving the wider pipework or heating circuit.
Electricals
Electric radiator installation, underfloor heating controls, and heating timer upgrades handled by our electrical team.
Handyman Services
Bundle radiator bleeding with other small property jobs for better value on a single visit.
Our Process
What You Can Expect
From your first call to the finished job, here is how our radiator & wall-heater maintenance service works.
Tell us the symptoms — cold at the top, cold at the bottom, a leaking valve, a loose radiator or a dead electric wall heater.
Send photos of the radiator and its valves, or the wall heater and its markings, so we can identify the right parts.
We confirm a price and book a slot, bringing common bleed keys, valves and fixings, and sourcing a like-for-like heater where needed.
We bleed and balance the radiators, replace faulty valves, re-secure brackets, or swap the electric wall heater like for like.
We check each radiator heats evenly and there are no leaks, then top up and confirm everything is working before we finish.
Insider Advice
Helpful Hints & Tips
Bleed radiators cold at the top
If a radiator is warm at the bottom but cold at the top, trapped air is the likely cause. Bleeding it releases the air so the whole panel heats — an easy win before winter.
Balance the system if some rooms lag
When radiators nearest the boiler run hot and far rooms stay cool, the system needs balancing so flow is shared evenly. It makes the whole home more comfortable.
Gas and boiler faults need a qualified engineer
If the problem is with the boiler itself or any gas appliance, that's specialist gas work and outside our scope — always use a suitably qualified engineer for it.
Our Workmanship Guarantee
Repair and maintenance work carried out by Multrex Maintenance Ltd is guaranteed against defects in workmanship for 12 months from the completion date. If the same fault recurs due to our workmanship within this period, we will return to investigate and rectify it at no charge. This guarantee covers Multrex labour — it does not cover faults arising from pre-existing conditions, customer-supplied materials, normal wear and tear, or damage caused after completion.
- 12 months workmanship guarantee from completion date
- Same fault recurring from our work? We return at no charge
- Does not cover pre-existing conditions or customer-supplied parts
- Unrelated new faults are a separate job
Common Questions
Radiator & Wall-Heater Maintenance — FAQs
While We're There
You Might Also Need
Why Multrex
Radiators Fixed Without the Gas-Engineer Price Tag
Most cold-radiator problems don't need a boiler engineer — they need a competent tradesperson who knows heating systems.
Clear Scope
We're explicit about what we do and don't do: radiator bleeding, balancing and valves are our territory. Boilers and gas appliances are not — and we'll never overreach into work that requires a Gas Safe engineer.
Parts on Board
We carry common bleed keys, lockshield valves and thermostatic valve heads so most straightforward jobs are resolved in a single visit, not left half-done while we source parts.
Even Heat Across Every Room
Balancing a system properly — not just bleeding the most obvious radiator — means every room reaches temperature, your boiler runs more efficiently, and the improvement lasts.
Radiator Maintenance — Areas We Cover
We bleed, balance, and repair radiators across Thurrock, Havering, and surrounding areas. Click your area for local information and pricing.
Request a Quote
Book Radiator Maintenance
Get a fast, no-obligation quote. We cover Thurrock, Essex, London, and Kent.
What do you need?
Choose a service and we'll give you a tailored quote form.
Cleaning
Maintenance & Property
Commercial & Industrial
We aim to respond the same working day.

